7 Best Drill Guide Attachments in 2021 review

7 Best Drill Guide Attachments in 2021 review

There will be parts needed to drill holes if you’re involved in woodworking. The drilling holes in wood will be done easily with drill bits and the size of the holes will not be the exact same size. To make an exactly similar drill holes you needed the drill to be straight and guided by something. That must have to make the drill holes even depth and accurate with the same size of holes on the wood. The drill attachment will guide the drill machine to make the holes accurate. These drill attachments will guide you like a drill press and these attachments will not replace the drill press. These attachments are smaller and suitable for your small projects that need drilling holes. There are many drill guides that have rectangular blocks with holes and each holes has specific sizes to make the holes according to the size you needed for the project. And some drill guides that have the next level of support for your drilling projects.And there are high level attachments for drill guides and these will take your projects to the next level. To get these types of drills guides and to know about the best drill guides read the following.

  1. Milescraft 1312 Drill Block

Brand : Milescraft
Size : Pack of 1
Material : Metal
Rating : 4.5

The Milescraft 1312 drill block is the lower price range among the drill guide. These Milescraft have upto six holes in the block and each holes has a different size and there are six optional sizes to make holes on your project workpiece. And these milescraft help you to make the holes even in straight. The milescraft make the right alignment with the drill machine while you’re drilling on the workpiece with dissimilar surfaces. And these make the holes and alignment of the drilling machine results in accuracy. These milescraft 1312 is one the convenient tool in the drill guides. Milescraft have six drill holes with different diameters in the range of ⅛ and ½ inches. These milescraft 1312 is made of rubber for the grip on the surface to make the holes and the drilling machine accurate. Because of this grip it’s been like some additional features and it prevents slipping while drilling and ensures will not make any damages to the workpiece. The milescraft help you to make holes even in rounded surfaces or on the corner of the workpiece and these will be easy to make holes on various surfaces. The design of these milescraft 1312 will make you handle easily and it is lightweight, only 4.6 ounces. But some customers needed the holes with smaller size than they provided.

2. Wolfcraft 4525404 ⅜-inch / ¼-inch Hand Drill Guide Attachment

Brand : Wolfcraft
Material : Aluminium
Cutting Diameter : 3-Inches
Rating : 3.7

The wolfcraft allows to drill clean and accurate holes with the help of a multi-angle drill guide. And these wolfcraft is perfect for both indoors and outdoors projects and gives you an accurate hole. But drill press is not the best option for all the time and the wolfcraft will provide centered holes on the board edges and rounded surfaces. It can be used in horizontal, vertical or angled position, anywhere of 0-45 degree angle. And the wolfcraft is lightweight and easy to handle aluminium base plate and it is double bar on the base. It is used to make the angle to drive back and forth to set your convenience. And the angle can be done up to 45 degrees. The wolfcraft can be adjusted depth and straight stop will make the drilling more easier and possible repetitive drilling. The clamp is provided at the base for the grip of the wolfcraft and these will reduce the slipping while drilling. The drill guide provide ⅜ inch and ¼ inch and the bumper pads are provided to avoid damage to the workpiece. The drill will not be the same size if you do not set the clamp properly in the same place.

3. STD 1000DGNP V-Drill Guide by Big Gator Tools

Brand : Big Gator Tools
Material : Steel
Size : Pocket size
Warranty : Lifetime
Rating : 4.7

The STD V-drill provides you with 17 holes in the steel bar and each holes has a different diameter size. The drill holes sized from ⅛ inch to ⅜ inches and each holes are incremented by 1/64 inch. These STD V-drill can be used in the flat, rounded, corner surfaces and these are made up of nickel alloyed steel heat treated because of these the bar gives more durability. The steel bar is made up of non-plated material with oil coating which will help the bar from rusting. The bar also indicates the alignment of the drilling machine with line up in the center. The bar button is designed for their easy alignment with different drill holes and that can easily make the holes even in rounded and flat surfaces. It can be a portable and lightweight drill guide. But the bar does not provide a drip or clamp to hold while drilling because of these cons the drilling may cause some dissimilar holes on the workpiece.

4. Kreg K4MS Jig Master System

Brand : Kreg Tool
Size : Pack of 1
Material : Steel
Rating : 4.7

The Kreg K4MS Jig Master System is expensive compared to all the drill guides in our list. But the price of this drill guide is affordable and reasonable. And these Kreg is the removable drill guide for easy portable from one place to another. The additional feature of this kreg is collecting the dust in separate attachments so you can make your projects with a clean table without dust. And these will take you to the next level of using drill guides you cannot even get this feature in drill press. The kreg allows you to make pocket-hole wide variety of material width and thickness. The size of the holes get incremented by ⅛ inches compared to each holes and it has provided the size from ½ inch to 1-½ inch thick. The large clamp is provided for grip and to secure your jig to the workbench. The case comes with a kreg jig K4, stepped drill bit, stop collar, 6” square drive bit, starter screw set, face clamp, and dust collection attachment. But once the work is done make sure that all the parts are set into the case because many customers report that the parts are missing and the attachments are plastic made so they do not give more durability.

5. Wolfcraft 4522 Drill Stand

Brand : Wolfcraft
Material : Metal
No. of pieces : 1
Rating : 3.9

The wolfcraft has 2 column bases and this will provide you for exact vertical, horizontal, or inclined up to the 45 degree angle. And the wolfcraft provides an adjustable stop and guide to the drilling machine for the centered alignment. The clamp is provided for the grip and this make while drilling without slipping. And the clamp also provides an additional handle placement. These wolfcraft give you the best attachment with the 43mm diameter size drills. These wolfcraft let you drill on the rounded and flat surfaces on the workpiece. These come with a double guide bar and the adjustable drilling with 45 degree angle rotation for easy use in every surface while drilling. But the drill guide will only be suitable for some drills and the pre-fixed holes will make it to secure it on the fixed stand.

6. JIG IT Drill Stand

Brand : Rockler
Material : Other
Weight : 1.08 Kilogram
Rating : 3.9

The JIG drill guide design looks simple and ergonomic and is easily portable with an affordable price range. If you are looking for a simple design drill guide then you can consider these JIG IT drill stands. It is made up of plastic and the bottom of these drill guides provides four rubber feet for the grip of the drilling machine and these prevent the JIT drill guide from slipping. The users who need only the small holes for your projects then these will be your best choice and give complicated holes on the workpiece. The additional feature of these products as you can use this in simple hand drill and even work press also. It is lightweight and easily portable. But make sure while buying the products have rubber feet because some users report that there are no rubber feet on the bottom.

7. Milescraft 1097 Tool Stand

Brand : Milescraft
Material : Metal
Power source : Corded Electric
Rating : 4.2

The Milescraft 1097 design looks exactly like the drill press and these simply convert the dremel style rotary tools to the mini drill press. It is made up of metal frame and that fits perfectly for the dremel and craftsman rotary tools. The milescraft stand has the locking depth which will help you for the repeated depth drilling. The milescraft provide you with a pinion gearing and metal rack which allows you for the smooth and controlled plunge for the straight and clean holes on the workpiece. And at the result this will give you uniform holes with similar depth. And the milescraft provided with clamps to avoid the non-slipping and the bottom helps you to place it on the rounded and flat surfaces on the workpiece. But the build quality of these products will not provide you with high quality experience.

Conclusion

There are other products in the market but according to the price with affordable and reasonable based products are these best 7 drill guides. We are not saying that these are the only best products in the market but these products’ prices are affordable compared to other drill guides. In these 7 best drill guides each guide has some pros and cons and you have to decide which is suitable for your project and if there is a new drill guide with an affordable price then we will update you soon as soon as possible. These drill guides give you confident and perfect holes and which can land on rounded and flat and corners of the workpiece.

Leave a Reply

Your email address will not be published. Required fields are marked *